What is the current situation of the injection molding plant?

（1） The development and innovation of injection molding plant is an overall, long-term and basic strategy for the development of injection molding industry. Afforestation should not only focus on the present, ignore the future, focus only on the fundamental, transfer experience, transfer knowledge and do not adopt strategies, otherwise the injection molding processing industry can not be led to narrow roads, canyons, curves and dead ends.

（2） Don't neglect repetition. To do a good job in the injection processing industry, we need to rely on technology, business technology, management technology, publicity and other technologies. We should rely on technology development strategy, talent development strategy, marketing strategy, financing strategy and other strategies. The difference is that the scope of the plan is large and the time of the plan is long.

In order to realize the development and innovation of the processing industry of injection molding plant, it is necessary to re analyze the demand highlights and trends of the market, re analyze the challenges and opportunities, re analyze their own strengths and weaknesses, and re analyze the core links and procedures. Why should we re analyze these basic situations, because many of the past analyses are outdated, or the analyses at that time have defects and errors?

To realize the development and innovation of the processing industry of injection molding plant, we need to develop new business contents, new business means, new personnel framework, new management system, new business strategy and so on. There is no fixed strategy. In essence, the development strategies formulated by various enterprises should be consistent. In terms of content and structure, the development strategies of different enterprises have little in common. After visiting several plastic factories in Singapore, China sicheng.com has felt a lot. They have kept a distance from us. From the original simple injection plastic parts processing to product design and development, and the establishment of dragon production mode, they are developing in the direction of OEM and ODM.

China's injection processing industry should develop in the direction of OEM and ODM. There must be a way.

What is the injection cycle of the injection molding plant?

The time required to complete the injection molding process is called the molding cycle (also known as the mold cycle). In fact, the next part - forming cycle 3360 forming cycle - will directly affect labor productivity and equipment utilization. Therefore, in the production process, while ensuring the quality, the relevant time of the forming cycle should be minimized. In the whole molding cycle, injection time and cooling time are important and have a decisive impact on product quality. The charging time of injection time is inversely proportional to the charging speed, and the charging time in production is usually about 3-5 seconds. The compression time of the injection time is the pressure time of the plastic in the hollow, accounting for about 20-120 seconds in the whole injection time (5-10 minutes for ultra-thin parts). The compression time of molten material on the gate before freezing will affect the accuracy of product size, which will not be affected in the future. Compression time is also a good value, depending on material temperature, mold temperature, sprue and gate size.